Advanced-technology LuxCore Uživatelský manuál stáhnout pdf

ATI-LII Revision 1 Effective Date: 3/13/12

Advanced Technology, Inc. (800) 849-1320 Page 1 of 5

LuxCore

Installation Instructions

ATTENTION: LuxCore PANELS MUST BE ACCLIMATIZED FOR 24

HOURS BEFORE INSTALLATION

PLEASE READ ALL INSTRUCTIONS PRIOR TO INSTALLATION

The guidelines provided herein have been established in good faith to help

prevent installation problems. Advanced Technology Inc. believes all

information contained herein to be correct. It is the responsibility of the

fabricator/customer to completely test the adhesives and methods of

fabrication to ensure that the results are satisfactory. Failure to comply

with the following instructions, as well as the adhesive manufacturers’

instructions, may result in significant installation problems. ATI is not

responsible for any fabrication or ancillary costs involved with using

LuxCore products.

INSPECTION

Please inspect LuxCore panels for any imperfections prior to installing; once

installed, panels may be very difficult to remove.

TOOLS REQUIRED

In order to cut LuxCore panels most effectively, a fine-tooth saw blade is

recommended. Swivel-head shears may be utilized for small cutouts or trims. For

pre-drilled fastener holes, a diamond-coated or carbide drill bit is recommended. If

the installation requires adhesive, it is recommended to utilize the trowel with the

notch pattern suggested by the adhesive manufacturer, since, the trowel used to

apply the adhesive can have a great effect on the success or failure of the

installation.

PANEL TRIMMING

If not using trim strips, it is recommended that the edges be properly trimmed with a

router. This will mitigate showing “white lines” from the factory edges of the panel.

A commercial high speed router using a Bosch 3/8” Laminate Trim Bit with ball

bearing, carbide tip, and roller tip (when appropriate) is recommended.

MATERIALS REQUIRED

 LuxCore Panels

 FRP formulated adhesive.

1 2 3 4 5

Shrnutí obsahu

Strany 1 - Installation Instructions

ATI-LII Revision 1 Effective Date: 3/13/12 Advanced Technology, Inc. (800) 849-1320 Page 1 of 5 LuxCore Installation Instructions A

Strany 2 - Trowel Application

ATI-LII Revision 1 Effective Date: 3/13/12 Advanced Technology, Inc. (800) 849-1320 Page 2 of 5 Trowel Application  PVC Moldings 

Strany 3

ATI-LII Revision 1 Effective Date: 3/13/12 Advanced Technology, Inc. (800) 849-1320 Page 3 of 5 MATERIAL Length Low High48" 27

Strany 4

ATI-LII Revision 1 Effective Date: 3/13/12 Advanced Technology, Inc. (800) 849-1320 Page 4 of 5 STEP 1 – PLANNING AND CUTTING  Fit

Strany 5

ATI-LII Revision 1 Effective Date: 3/13/12 Advanced Technology, Inc. (800) 849-1320 Page 5 of 5  If using fasteners, install fasten

Komentáře k této Příručce

Žádné komentáře

Advanced-technology LuxCore Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro domov Advanced-technology LuxCore. Advanced Technology LuxCore User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro domov Advanced-technology LuxCore